| Model | C1-WS3650-48TS/K9 |
|---|---|
| Brand | Cisco |
| Port Configuration | 48 × 10/100/1000BASE-T ports, 4 × 1 Gigabit Ethernet SFP uplinks |
| Switching Capacity | 176 Gbps (non-Multigigabit model) |
| Forwarding Rate | 77.37 Mpps |
| Stacking Bandwidth | 160 Gbps |
| DRAM | 4 GB |
| Flash Memory | 2 GB (non-Multigigabit model) |
| MAC Addresses | 32,000 |
| IPv4 Routes | 24,000 |
| VLAN IDs | 4,094 |
| Jumbo Frames | 9,198 bytes |
| Wireless AP Support | Up to 25 per switch or stack |
| Wireless Clients | 1,000 per switch or stack |
| Dimensions (H × W × D) | 1.73 in × 17.5 in × 17.625 in (4.4 cm × 44.5 cm × 44.8 cm) |
| MTBF | 527,580 hours |
| Power Consumption | Idle: 61.1 W, Full Load: 86.4 W |
| Operating Temperature | Normal: -5°C to +45°C (up to 5,000 ft), Short-term: -5°C to +50°C (≤96 hrs/year) |
| Humidity | 5% to 90% noncondensing |
| Acoustic Noise | 48 dB(A) maximum at 25°C |
| Stacking | StackWise-160, up to 9 units |
| Management Interfaces | 1 × RJ-45 console, 1 × 10/100 management port |
| Security Features | 802.1X authentication, port security |
| Standards Compliance | IEEE 802.3af/at (PoE+), UL, CE, NEBS certified |
| Uplinks | 4 × SFP (1000BASE-SX/LX) |
| Stack Ports | Cisco StackWise-160 copper cables |
| Minimum IOS Version | 16.6.1 or later |
| Feature Sets | IP Base (RIP, EIGRP, OSPF), LAN Base (Layer 2) |
| Key Features | High-density 48-port 1G connectivity, quad 1G SFP uplinks for flexible connectivity, StackWise-160 technology for scalable deployment, embedded wireless controller for up to 25 APs |
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.