WS-C3560CX-8PT-S Specifications |
||
| Performance | Forwarding Bandwidth | 46 Gbps (with C3560CX-8XPD-S)
34 Gbps (with C3560CX-12PD-S) 16 Gbps (with 1 G uplinks) |
| Switching Bandwidth (full-duplex capacity) | 92 Gbps (with C3560CX-8XPD-S)
68 Gbps (with C3560CX-12PD-S) 32 Gbps (with 1 G uplinks) |
|
| Flash memory | 128 MB | |
| Memory DRAM | 512 MB | |
| Max VLANs | 1023 | |
| VLAN IDs | 4000 | |
| Maximum Transmission Unit (MTU) | Up to 9000 bytes | |
| Jumbo frames | 9198 bytes | |
| Forwarding rate 64 Byte Packet | 14.9 mpps | |
| Connectors and cabling | Cisco Catalyst 3560-CX and 2960-CX Ethernet Interfaces:
● 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling
● 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
● 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
|
|
| Power connectors |
● Customers can provide power to a switch by using the internal power supply. The connector is located at the back of the switch. The internal power supply is an autoranging unit
● The internal power supply supports input voltages between 100 and 240VAC
● Use the supplied AC power cord to connect the AC power connector to an AC power outlet
Note: The Cisco Catalyst WS-C3560CX-8PT-S has an option for an external AC-DC or DC-DC power adapter if desired. |
|
| Indicators | Per-port status: Link integrity, disabled, activity, speed, full-duplex System status: System, link status, link duplex, link speed | |
| Dimensions (H x W x D) | 1.75 x 10.6 x 7.0 Inches | |
| Weight | 3.5 Pounds | |
| Environmental ranges | Operating* temperature up to 5000 ft (1524 m) | -5°C to +45°C** |
| Operating* temperature up to 10,000 ft (3048 m) | -5°C to +45°C | |
| Storage temperature up to 15,000 ft (4572 m) | -25°C to +70°C | |
| Operating altitude | Up to 3048 m | |
| Storage altitude | Up to 4000 m | |
| Operating relative humidity | 5% to 95% noncondensing | |
| Storage relative humidity | 5% to 95% noncondensing | |
| * Minimum ambient temperature for cold start is 0°C (+32°F)
** 10G SKUs have a maximum operating temperature of 40°C. For WS-C3560CX-8XPD-S, the max operating temperature will be 35°C when installed inverted and under fully loaded conditions (max. POE and 10G SFP+ transceivers installed) |
||
| Mean Time Between Failure (MTBF) | 737,740 hours | |
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.