WS-C3560C-8PC-S, Cisco Catalyst 3560C Switch, 8x FE PoE/2x Dual Uplink/IP Base
$928
WS-C3560C-8PC-S Specifications |
||||
| Performance | Forwarding Bandwidth | 10 Gbps | ||
| Flash memory | 64 MB | |||
| Memory DRAM | 128 MB | |||
| Max VLANs | 1005 | |||
| VLAN IDs | 4000 | |||
| Maximum transmission unit (MTU) | Up to 9000 bytes | |||
| Jumbo frames | 9018 bytes | |||
| Connectors and cabling | Cisco Catalyst 3560-C and 2960-C with SFP-based ports:
● 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling ● 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling ● 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling ● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling ● 1000BASE-SX -LX/LH, -ZX, -BX, -T*, -FX*, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber) ● 100BASE-LX, -BX, -FX: SFP-based ports: LC fiber connectors (single/multimode fiber) *GLC-T and GLC-GE-100FX are not supported |
|||
| Power connectors | ● Customers can provide power to a switch by using the internal power supply. The connector is located at the back of the switch. The internal power supply is an autoranging unit (3560CPD-8PT-S, 2960CPD-8TT-L, 2960CPD-8PT-L do not require a power supply).
● The internal power supply supports input voltages between 100 and 240VAC. ● Use the supplied AC power cord to connect the AC power connector to an AC power outlet. Note: The Cisco Catalyst 3560CPD-8PT-S, 2960CPD-8PT-L and 2960CPD-8TT-L have an option for an external power adapter if desired. |
|||
| Indicators | ● Per-port status: Link integrity, disabled, activity, speed, full-duplex
● System status: System, RPS, link status, link duplex, link speed |
|||
| Dimensions (H x W x D) |
1.75×10.6×9.4 Inches | |||
| Weight | 4.3 Pounds | |||
| Environmental ranges | Operating* temperature up to 5000 ft (1524 m) | -5°C to +45°C**
+23°F to +113°F |
||
| Operating* temperature up to 10,000 ft (3048 m) | -5°C to +45°C
+23°F to +113°F |
|||
| Storage temperature up to 15,000 ft (4572 m) | -25°C to +70°C
-13°F to +158°F |
|||
| Operating altitude | Up to 3048 m
Up to 10,000 ft |
|||
| Storage altitude | Up to 4000 m
Up to 15,000 ft |
|||
| Operating relative humidity | 5% to 95% noncondensing | |||
| Storage relative humidity | 5% to 95% noncondensing | |||
| * Minimum ambient temperature for cold start is 0°C (+32°F).
** FE SKUs only GE SKU have a max operation temp of 40C. |
||||
| Acoustic noise | 0dB (fanless) | |||
| Mean time between failure (MTBF) | 373,635 | |||
Get any Information:
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.
