| Model | N3K-C3548P-10G |
|---|---|
| Brand | Cisco |
| Ports | 48 fixed SFP+ ports (1 or 10 Gbps) |
| Management Ports | Two 10/100/1000-Mbps management ports |
| Console Port | One RS-232 serial console port |
| USB Port | One USB port |
| Power Supplies | Dual redundant hot-swappable power supplies |
| Fans | Four individual redundant hot-swappable fans |
| Performance | 960-Gbps switching capacity |
| Forwarding Rate | 720 million packets per second (mpps) |
| Throughput | Line-rate traffic throughput on all ports |
| MTU | Configurable MTUs up to 9216 bytes (jumbo frames) |
| Typical Operating Power | 152 watts (W) |
| Typical Heat Dissipation | 519 BTUs per hr |
| Maximum Power | 265 watts (W) |
| Maximum Heat Dissipation | 904 BTUs per hr |
| MAC Addresses | 64,000 (Normal Mode), 8000 (Warp Mode) |
| IPv4 Unicast Routes | 24,000 (Normal Mode), 4000 (Warp Mode) |
| IPv4 Hosts | 64,000 (Normal Mode), 8000 (Warp Mode) |
| IPv4 Multicast Routes | 8000 |
| VLANs | 4096 |
| ACL Entries | 4096 |
| Spanning-tree Instances | Rapid Spanning Tree Protocol (RSTP): 512, Multiple Spanning Tree (MST) Protocol: 64 |
| EtherChannels | 24, with 24 ports per EtherChannel |
| Buffer Size | 6 MB shared among 16 ports; 18 MB total |
| Boot Flash Memory | 2 GB (3524P and 3548P models); 4 GB (3524X and 3548X models) |
| Input Voltage | 100 to 240 VAC |
| Frequency | 50 to 60 Hz |
| Power Supply Efficiency | 89 to 91% at 220V |
| Cooling | Forward and reversed airflow schemes |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
| Relative Humidity (operating) | 10 to 85% noncondensing, up to 5 days at maximum (85%) humidity, recommend ASHRAE data center environment |
| Relative Humidity (nonoperating) | 5 to 95% noncondensing |
| Altitude | 0 to 10,000 ft (0 to 3000m) |
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.