| Feature |
EX3400-24T-DC
|
EX3400-24P
|
EX3400-48T
|
EX3400-48P
|
EX3400-24T-DC
|
| Access Ports | 24 × 10/100/1000BASE-T | 24 × 10/100/1000BASE-T | 48 × 10/100/1000BASE-T | 48 × 10/100/1000BASE-T | 24 × 10/100/1000BASE-T |
| PoE | No PoE | PoE+ on all 24 ports | No PoE | PoE+ on all 48 ports | No PoE |
| PoE Power per Port | Not applicable | Up to 30W | Not applicable | Up to 30W | Not applicable |
| SFP/SFP+ Uplinks | 4 × dual-mode SFP/SFP+ | 4 × dual-mode SFP/SFP+ | 4 × dual-mode SFP/SFP+ | 4 × dual-mode SFP/SFP+ | 4 × dual-mode SFP/SFP+ |
| QSFP+ Uplinks | 2 × 40GbE QSFP+ | 2 × 40GbE QSFP+ | 2 × 40GbE QSFP+ | 2 × 40GbE QSFP+ | 2 × 40GbE QSFP+ |
| Packet Switching | 144 Gbps unidirectional / 288 Gbps bidirectional | 144 Gbps unidirectional / 288 Gbps bidirectional | 168 Gbps unidirectional / 336 Gbps bidirectional | 168 Gbps unidirectional / 336 Gbps bidirectional | 144 Gbps unidirectional / 288 Gbps bidirectional |
| L2/L3 Throughput | 214 Mpps | 214 Mpps | 250 Mpps | 250 Mpps | 214 Mpps |
| Default PSU | JPSU-150-DC-AFO | JPSU-600-AC-AFO | JPSU-150-AC-AFO | JPSU-920-AC-AFO | JPSU-150W-DC-AFO |
| Airflow | Front-to-back | Front-to-back | Front-to-back | Front-to-back | Front-to-back |
| Recommended Use | 24-port non-PoE AC access | 24-port PoE+ access | 48-port non-PoE access | High-density 48-port PoE+ access | 24-port non-PoE DC-powered access |
EX3400-24T-DC Specification |
|
| Chassis | |
| Airflow Direction | Front to back airflow |
| Processor | |
| Installed Qty | 1 |
| Clock Speed | 1 GHZ |
| RAM | |
| Installed Size | 2 GB |
| Flash Memory | |
| Installed Size | 2 GB, 2 GB |
| Performance | |
| Performance
|
Switching capacity (64-byte packet size): 288 Gbps, Throughput: 214 Mpps |
| Networking | |
| Type | Switch |
| Subcategory
|
Network hubs and switches
|
| Subtype | Gigabit Ethernet |
| Form Factor | Rack-mountable |
| Stackable | Stackable |
| Max Units In A Stack | 10 |
| Ports Qty | 24 |
| Advanced Switching | Layer 3 |
| Routing Protocol
|
CIDR, IS-IS, MSDP, RIP-1, RIP-2, RIPng, Static IPv4 routing, Static IPv6 routing |
| MAC Address Table Size | 32000 entries |
| Jumbo Frame Support | 9216 bytes |
| Manageable | Yes |
| Ports | |
| Qty | 24 |
| Type | 10/100/1000 |
| Interface Provided | |
| Interfaces
|
1 x 100Base-TX RJ-45 management, 1 x serial management, 2 x 40Gbit LAN QSFP+ uplink/stacking, 24 x 1000Base-T RJ-45, 4 x 10Gbit LAN SFP+ uplink/stacking |
| Power Device | |
| Type | Internal power supply |
| Hot-Plug | Hot-plug |
| Power Redundancy | Optional |
| Power Redundancy Scheme | 1+1 (with optional power supply) |
| Installed Qty | 1 |
| Max Supported Qty | 2 |
| Power Provided | 150 watt |
| Power Consumption Operational | 100 watt |
| Dimensions | |
| Width | 17.2 inch |
| Depth | 13.8 inch |
| Height | 1.7 inch |
| Type | Part Number | Description |
| Front Uplink Interfaces | 4 × SFP/SFP+ | Supports 1GbE SFP, 10GbE SFP+, or a combination of both. Optical modules are ordered separately. |
| Type | Part Number | Description |
| 40GbE Uplinks | 2 × QSFP+ | Configured as Virtual Chassis ports by default. They can also be configured as network ports for upstream aggregation. |
| Type | Part Number | Description |
| SFP+ DAC Cables | EX-SFP-10GE-DAC-1M | 10GbE SFP+ passive direct attach copper cable, 1 m. |
| EX-SFP-10GE-DAC-3M | 10GbE SFP+ passive direct attach copper cable, 3 m. | |
| EX-SFP-10GE-DAC-5M | 10GbE SFP+ passive direct attach copper cable, 5 m. | |
| EX-SFP-10GE-DAC-7M | 10GbE SFP+ passive direct attach copper cable, 7 m. |
| Type | Part Number | Description |
| Power Supplies | JPSU-150-DC-AFO | 150W DC power supply with front-to-back airflow. Supports hot insertion and removal. |
| Type | Part Number | Description |
| Fan Modules | EX3400-FAN-AFO | Front-to-back airflow fan module for EX3400 switches. |
| Type | Part Number | Description |
| Virtual Chassis Interconnection | QSFP+ or SFP+ VCP | Up to 10 EX3400 switches can operate as one logical device. SFP transceivers cannot be used to form a Virtual Chassis. |
| Type | Part Number | Description |
| Upstream Router or Aggregation Connection | SFP, SFP+, or QSFP+ | Use 1GbE SFP, 10GbE SFP+, or 40GbE QSFP+ interfaces according to the upstream device, transceiver, cable, and distance requirements |
| Access Ports | 24 × 10/100/1000BASE-T RJ-45 ports. PoE is not available on the EX3400-24T-DC network ports. |
| SFP/SFP+ Uplinks | Four uplink ports support 1GbE SFP, 10GbE SFP+, or a combination of both. |
| QSFP+ Uplinks | Two 40GbE QSFP+ ports are available for Virtual Chassis or network uplink operation. |
| Virtual Chassis | Supports up to 10 EX3400 switches. QSFP+ ports are configured as VCPs by default; SFP+ ports can also be configured as VCPs. |
| VCP Transceivers | SFP+ or QSFP+ transceivers are required for Virtual Chassis interconnection. SFP transceivers cannot form a Virtual Chassis. |
| DC Power | Uses JPSU-150-DC-AFO, with -48 through -60VDC input and 150W output. A compatible power cord must be confirmed separately. |
| Airflow | The switch uses front-to-back airflow. Power supply and fan module airflow should match the chassis airflow direction. |
| Optics and Cables | Use Juniper-qualified optical transceivers and DAC cables. Exact optic compatibility should be checked in the Juniper Hardware Compatibility Tool before ordering. |
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.