CISCO2951-SEC/K9, Cisco 2951 Integrated Services Router, 3 onboard GE/4 EHWIC slots/512MB DRAM

Services and Slot Density

Embedded Hardware-Based Cryptography and Acceleration

Yes

Cisco Unified SRST Sessions

250

Cisco Unified CCME Sessions

150

Total Onboard WAN 10/100/1000 Ports

3

RJ-45-Based Ports

3

SFP-Based Ports (use of SFP port disables the corresponding
RJ-45 port)

1

Service Module Slots

2

Double-Wide Service Module Slots (use of a double-wide slot will occupy all single-wide service module slots in a 2900)

1

EHWIC Slots

4

Double-Wide EHWIC Slots (use of a double-wide EHWIC slot will consume two EHWIC slots)

2

ISM Slots

1

Onboard DSP (PVDM) Slots

3

Memory DDR2 ECC DRAM – Default

512 MB

Memory (DDR2 ECC DRAM) – Maximum

2 GB

Compact Flash (External) – Default

slot 0: 256 MB

slot 1: none

Compact Flash (External) – Maximum

slot 0: 4 GB

slot 1: 4 GB

External USB 2.0 Flash Memory Slots (Type A)

2

USB Console Port (Type B) (up to 115.2 kbps)

1

Serial Console Port

1

Serial Auxiliary Port

1

Power-Supply Options

AC, PoE, and DC

RPS Support (External)

Cisco RPS 2300

Power Specifications

AC Input Voltage

100 to 240 VAC auto ranging

AC Input Frequency

47 to 63 Hz

AC Input Current Range AC Power Supply (Maximum)

3.4 to 1.4A

AC Input Surge Current

<50A

Typical Power (No Modules) (Watts)

70

Maximum Power with AC Power Supply (Watts)

340

Maximum Power with PoE Power Supply (Platform Only) (Watts)

405

Maximum Power with DC-PoE Power Supply (Platform Only) (Watts)

–

Maximum End-Point PoE Power Available from AC PoE Power Supply (Watts)

370

Maximum End-Point PoE Power Available from DC PoE Power Supply (Watts)

–

Maximum End-Point PoE Power Capacity with PoE Boost (Watts)

750

DC Input Voltage

24 to 60 Vdc, autoranging positive or negative

DC Input Current

(MAX) 12A (24V)

5A (60V)