C1101-4PLTEPWX, Cisco ISR 1101 Router, 4xLTE/Integrated WiFi/4 Ports
$0
C1101-4PLTEPWX Specification |
|
|
GE |
1 |
|
GE/SFP combo |
N/A |
|
ADSL2/VDSL2+ |
N/A |
|
LTE Advanced (CAT6) |
N/A |
|
802.11ac |
2X2 MIMO |
|
GE |
4 |
|
PoE |
N/A |
|
PoE+ |
N/A |
|
Integrated USB 3.0 AUX/console |
Yes (No AUX) |
|
Pluggable |
Yes (All) |
| Memory (default and maximum) | DRAM: 4 GB
Flash: 4 GB |
| Console | · Micro USB console (USB 3.0). |
| Mini-USB port (reserved) | · Micro-USB port to support remote LTE diagnostics and monitoring tools (Qualcomm CAIT and Spirent UDM) (USB 3.0). |
| 802.11ac | · 2×2 SU-MIMO/MU-MIMO with two spatial streams.
· Maximal Ratio Combining (MRC). · 20-, 40-, and 80-MHz channels. · PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz). · Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx). · 802.11 Dynamic Frequency Selection (DFS). · Cyclic Shift Diversity (CSD) support. |
| Software | · Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 (8.7 for 1101 series) MR1 or later. |
| External power supply | · AC input voltage: Universal 100 to 240 VAC.
· Frequency: 50 to 60 Hz. · Maximum output power: 66W (default). · Output voltages: 12 VDC. · Optional PoE and PoE+: ◦   Single 150W power supply required for Cisco 1100-8P series router ◦   Single 115W power supply required for Cisco 1100-4P series router · External output voltage: 48 VDC. |
| USB 3.0 | · USB devices supported:
◦   USB eTokens and USB flash memory · Note: Devices USB 3.0 supports to be connected externally. |
| LEDs | · WWAN (green/amber).
· SIM status (green/amber). · Received signal strength indication (RSSI) bar (green). · 3G/LTE service (green/amber). · GPS (green/amber). · Speed and link for Gigabit Ethernet WAN port (green). · Speed and link for all Fast Ethernet LAN ports (green). |
| Physical dimensions
(H x W x D) |
 1.1 x 7.5 x 6.0 in. (27.9 x 190.5 x 152.4 mm) (includes rubber feet models) |
| Weight | 3.34 lb (1.51kg) |
| Environmental operating range | · Nonoperating temperature: -4° to 149°F (-0° to 65°C).
· Nonoperating humidity: 5% to 95% relative humidity (noncondensing). · Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m). · Operating temperature: 32° to 113°F (0° to 45°C). · Operating humidity: 10% to 85% relative humidity (noncondensing). · Operating altitude: 0 to 10,000 ft (0 to 3000 m). |
Recomennderd Supported Products
| Models | Description |
| SL-1100-4P-APP | AppX License for Cisco ISR 1100 4P Series |
| C1-SL-1100-4P-APP | AppX Foundation License for Cisco ISR 1100 4P Series |
| SL-1100-4P-SEC | Security License for Cisco ISR 1100 4P Series |
| C1-SL-1100-4P-SEC | Security License for Cisco ISR 1100 4P Series |
| SL-1100-4P-SECNPE | NPE Security License for Cisco ISR 1100 4P Series |
| GLC-EX-SMD | 1000BASE-EX SFP transceiver module, SMF, 1310nm, DOM. |
| GLC-LH-SMD | GE SFP, LC connector LX/LH transceiver; with DOM. |
| GLC-SX-MMD | GE SFP, LC connector SX transceiver; with DOM. |
| GLC-ZX-SMD | 1000BASE-ZX SFP; with DOM. |
| GLC-FE-100ZX | 100BASE-ZX SFP (80km). |
| GLC-BX-D | 1000BASE-BX SFP, 1490NM. |
| GLC-BX-U | 1000BASE-BX SFP, 1310NM. |
- Get any Information:
Do you have any question or need quotation about this Product? : Contact us now via Fast Response Chat or Contact me here.
Get any Information:
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.
