R0X30A Specification |
|
| General | |
| Device Type | Switch – 48 ports – L3 – managed |
| Enclosure Type | Rack-mountable 7U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 48 x 1 Gigabit / 10 Gigabit SFP+ + 8 x 1 Gigabit / 10 Gigabit / 25 Gigabit / 50 Gigabit SFP56 (uplink) |
| Power Over Ethernet (PoE) | PoE+ |
| MAC Address Table Size | 32000 entries |
| Jumbo Frame Support | 9198 bytes |
| Routing Protocol | EGP, BGP-4, IGMPv2, IGMP, VRRP, OSPFv2, IGMPv3, OSPFv3, MSDP, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), MLDv2, MLD, Bidirectional Forwarding Detection (BFD) |
| Remote Management Protocol | RMON, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH, SSH-2, CLI, XRMON, SFTP |
| Authentication Method | Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1t, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3at, IEEE 802.1AX, IEEE 802.3bt |
| Expansion / Connectivity | |
| Interfaces | 48 x 100/1000/2.5G/5G SFP+ PoE+ ¦ 8 x 1Gbit/10Gbit/25Gbit/50Gbit (uplink) SFP56 ¦ 1 x USB-C console ¦ 1 x console RJ-45 ¦ 1 x USB Type A |
| Installed Modules Qty (Max) | 4 (installed) / 7 (max) |
| Power | |
| Power Device | Internal power supply (not installed) |
| Installed Qty | 4 (max) |
| Power Redundancy | Optional |
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.