| Model | C1-X45-SUP8-E |
|---|---|
| Brand | Cisco |
| Form Factor | Modular supervisor engine for Catalyst 4500E Series chassis |
| Switching Capacity | Up to 928 Gbps (wired), 20 Gbps (wireless termination, software roadmap) |
| Throughput | 250 Mpps (IPv4), 125 Mpps (IPv6) |
| Per-Slot Bandwidth | 48 Gbps |
| CPU | Quad-core, 2.0 GHz |
| Memory | SDRAM: 4 GB, NVRAM: 2 GB, Flash: 64 MB (supports SD card for additional storage) |
| IPv4 Routes | 256,000 (hardware-accelerated) |
| IPv6 Routes | 128,000 (hardware-accelerated) |
| Multicast Routes | 32,000 |
| Security & QoS Entries | 128,000 (ACL, QoS, TrustSec) |
| MAC Address Table | 55,000 entries |
| Active VLANs | 4,094 |
| 10G Uplinks | 8 × SFP+ (non-blocking, supports Flexible NetFlow) |
| Gigabit Ethernet Ports | 384 (via line cards) |
| PoE Support | PoE+ (30W) on all ports, Cisco UPoE (60W) |
| Converged Wired & Wireless | 20 Gbps wireless termination, supports 50 APs & 2,000 clients per switch |
| Resiliency | NSF/SSO, ISSU, Dual-supervisor redundancy |
| Software | Cisco IOS XE (LAN Base, IP Base, Enterprise Services) |
| IPv6 Support | Full hardware acceleration, wire-rate forwarding |
| Security Features | Cisco TrustSec (SGA, MACsec), 802.1X, Flexible Authentication, Dynamic ACLs |
| Management | Embedded Wireshark, Flexible NetFlow (128,000 entries), SNMPv3, CLI, CiscoView |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Power Consumption | Active: 400W max, Standby: 265W max |
| MTBF | 309,906 hours |
| Software Licenses | C4500E-LB (LAN Base), C4500E-IPB (IP Base), C4500E-ES (Enterprise Services) |
| Chassis Compatibility | Catalyst 4503-E, 4506-E, 4507R+E, 4510R+E |
| Line Card Compatibility | Supports E-Series & classic 4500 line cards (mixed deployment) |
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.