| Feature |
EX4300-32F
|
EX4300-48T
|
EX4300-24T
|
EX4300-24P
|
EX4300-48P
|
| Port Configuration | 32 × 1G SFP, 4 × 10G SFP+, 2 × 40G QSFP+ | 48 × 10/100/1000BASE-T, 4 × 40G QSFP+ | 24 × 10/100/1000BASE-T, 4 × 40G QSFP+ | 24 × 10/100/1000BASE-T PoE+, 4 × 40G QSFP+ | 48 × 10/100/1000BASE-T PoE+, 4 × 40G QSFP+ |
| Optional Uplink Module | EX-UM-2QSFP or EX-UM-8X8SFP | EX-UM-4X4SFP | EX-UM-4X4SFP | EX-UM-4X4SFP | EX-UM-4X4SFP |
| PoE | No | No | No | PoE+ | PoE+ |
| Data Rate | 464 Gbps | 496 Gbps | 448 Gbps | 448 Gbps | 496 Gbps |
| Forwarding Performance | 345 Mpps | 369 Mpps | 333 Mpps | 333 Mpps | 369 Mpps |
| Power Supply | 350W AC AFO | 350W AC AFO | 350W AC AFO | 715W AC AFO | 1100W AC AFO |
| Recommended Use | Fiber access, fiber aggregation, and data center ToR | High-density copper access | Smaller copper campus access | PoE access for APs and IP phones | High-density PoE access |
| Not Ideal For | Copper-only endpoints or PoE devices | Fiber-first access networks | 32-port fiber deployments | Fiber-only access | Fiber-only access |
| Check Item | EX4300-32F Requirement | Selection Guidance |
| Access Port Type | 32 × 1G SFP | Use matching 1G SFP optics and fiber standards. |
| Fixed 10G Uplinks | 4 × 10G SFP+ | Use compatible 10G SFP+, LRM, or DAC connections according to the link design. |
| Fixed 40G Uplinks | 2 × 40G QSFP+ | Use compatible 40G QSFP+ optics or DAC connections. |
| Optional Module | EX-UM-2QSFP or EX-UM-8X8SFP | Choose the module according to the required 1G/10G or 40G expansion. |
| PoE Requirement | Not supported | Do not select this model when endpoint power delivery is required. |
| Power and Airflow | 350W AC AFO, front-to-back airflow | Use matching AFO power and fan components; do not mix AFO and AFI components. |
| Virtual Chassis | Up to 10 EX4300 switches | Use QSFP+ or supported uplink module ports configured as VCPs. |
| Upstream Device Connection | Router, aggregation switch, or Ethernet device with matching interface | Match interface speed, transceiver type, fiber standard, and configuration before deployment. |
EX4300-32F Specification |
|
| Description | Juniper EX4300 switch with 32-port 100/1000BASE-X SFP, 4x10GBASE-X SFP+, 2x40GBASE-X QSFP+, and 350 W AC PS (optics sold separately) |
| Form factor | Fixed platform Virtual Chassis configuration consisting of 10 switches |
| Dimensions (W x H x D) | 17.4 x 1.7 x 16.4 in (44.2 x 4.3 x 41.7 cm) 1 rack unit |
| Backplane speed | 320 Gbps (Virtual Chassis) |
| Data rate | 464 Gbps |
| Throughput | 345 Mpps (wire speed) |
| 40GBASE quad small form-factor pluggable plus transceiver (QSFP+) port densities | 4 per switch Up to 20 in Virtual Chassis configuration (assuming 2 ports per switch are used for forming Virtual Chassis) |
| 100GBASE C form-factor pluggable transceiver (CFP) port densities | N/A |
| Resiliency | Internal, hot-swappable redundant power supply; field-replaceable fans; graceful Routing Engine switchover (GRES) in Virtual Chassis configuration |
| Operating system | Junos OS |
| Traffic monitoring | sFlow |
| Quality-of-service (QoS) queues/port | 12 |
| MAC addresses | 64,000 |
| Jumbo frames | 9216 bytes |
| IPv4 unicast/multicast routes | 32,000/8000 |
| IPv6 unicast/multicast routes | 18,000/4000 |
| Number of VLANs | 4093 |
| ARP entries | 64,000 |
| Category | Part Number | Description |
| Uplink Modules | EX-UM-2QSFP | 2-port 40G QSFP+ uplink module supporting up to two QSFP+ transceivers. The ports can also be configured as Virtual Chassis Ports. |
| EX-UM-8X8SFP | 8-port dual-mode 1G/10G SFP/SFP+ uplink module supporting SFP, SFP+, or mixed transceiver configurations. |
| Category | Part Number | Description |
| Optical Interfaces | SFP, SFP+, QSFP+ | Supports 1G SFP SX/LX, 10G SFP+ SR/USR/LR/ER/LRM/DAC, and 40G QSFP+ SR/DAC interface types. Optics are sold separately. |
| Category | Part Number | Description |
| Power Supplies | JPSU-350-AC-AFO-A | 350W AC AFO power supply with front-to-back airflow; shipped by default with EX4300-32F. |
| Category | Part Number | Description |
| Fan Modules | EX4300-FAN | AIR OUT fan module for front-to-back airflow; two modules are shipped by default with EX4300-32F. |
| Category | Part Number | Description |
| Virtual Chassis and Switch Interconnection | QSFP+ VCP Connections | The built-in QSFP+ ports and supported uplink module ports can be configured as Virtual Chassis Ports for Virtual Chassis or Virtual Chassis Fabric connections. Up to 10 EX4300 switches can form one Virtual Chassis. |
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.