| Feature |
EX2300-24P
|
EX2300-24P-VC
|
EX2300-24T
|
EX2300-48P
|
EX2300-24MP
|
| Port Configuration | 24 × 10/100/1000BASE-T PoE+ | 24 × 10/100/1000BASE-T PoE+ | 24 × 10/100/1000BASE-T | 48 × 10/100/1000BASE-T PoE+ | 16 × 10/100/1000BASE-T + 8 × 10/100/1000/2500BASE-T PoE+ |
| Uplink Configuration | 4 × 1/10GbE SFP/SFP+ | 4 × 1/10GbE SFP/SFP+ | 4 × 1/10GbE SFP/SFP+ | 4 × 1/10GbE SFP/SFP+ | 4 × 1/10GbE SFP/SFP+ |
| PoE | 370W maximum budget | 370W maximum budget | No PoE | 740W maximum budget | 380W maximum budget |
| Switching/Data Rate | 128 Gbps bidirectional | 128 Gbps bidirectional | 128 Gbps bidirectional | 176 Gbps bidirectional | 208 Gbps |
| Forwarding Performance | 95 Mpps | 95 Mpps | 95 Mpps | 130 Mpps | 154 Mpps |
| Power Supply | 1 fixed internal AC PSU | 1 fixed internal AC PSU | 1 fixed internal AC PSU | 1 fixed internal AC PSU | 1 fixed internal AC PSU |
| Airflow | Front-to-back | Front-to-back | Front-to-back | Front-to-back | Side-to-side |
| Recommended Use | 24-port PoE+ access with 1G endpoints and 10G uplinks | 24-port PoE+ access when the Virtual Chassis license is required | Non-PoE 24-port access networks | Higher-density PoE access deployments | Mixed 1G and 2.5G PoE+ access deployments |
| Not Ideal For | 2.5G/5G/10G access endpoints or redundant PSU requirements | Deployments that do not need Virtual Chassis or require multigigabit access | Deployments requiring direct PoE for connected devices | Small deployments or networks requiring multigigabit access | Deployments that only require standard 1G access ports |
| Model | EX2300-24P |
|---|---|
| Brand | Juniper |
| Form Factor | Fixed platform |
| Virtual Chassis configuration consisting of up to four switches | Junos Fusion Enterprise Satellite device |
| Ports | 24-port 10/100/1000BASE-T PoE+, 4 x 1/10GbE SFP/SFP+ (optics sold separately) |
| Dimensions (W x H x D) | 17.4 x 1.75 x 10.2 in (44.19 x 4.45 x 25.9 cm) |
| 1 rack unit | Backplane Speed |
| 80 Gbps | Data Rate |
| 128 Gbps | Throughput |
| 95 Mpps (wire speed) | Resiliency |
| Integrated power supply and fans | Operating System |
| Junos OS | Traffic Monitoring |
| sFlow | Quality-of-Service (QoS) Queues/Port |
| 8 | MAC Addresses |
| 16,000 | Jumbo Frames |
| 9216 bytes | IPv4 Unicast / Multicast Routes |
| 4096 / 2048 | IPv6 Unicast / Multicast Routes |
| 2048 / 1024 | Number of VLANs |
| 4093 | ARP Entries |
| 1500 |
| Category | Option | Connection Details |
| Built-in Uplink Interfaces | 4 × 1/10GbE SFP/SFP+ | The fixed uplink ports support upstream connectivity, link aggregation, and switch interconnection. |
| Optical Transceivers | SFP and SFP+ transceivers | Use Juniper-qualified transceivers supported on the EX2300 platform. Select the optic according to the required speed, fiber type, and transmission distance. |
| SFP+ DAC Cables | Passive SFP+ DAC cables | Supported passive DAC lengths include 1 m, 3 m, 5 m, and 7 m for short in-rack or adjacent-rack connections. |
| Virtual Chassis Interconnection | Up to four EX2300 switches | Configure 10GbE uplink ports as Virtual Chassis ports and use the required license with SFP+ transceivers or supported SFP+ interconnects. SFP transceivers cannot be used for Virtual Chassis connections. |
| Switch-to-Switch Connectivity | DAC or fiber uplinks | Use passive SFP+ DAC cables for short connections or compatible SFP/SFP+ transceivers and fiber cabling for longer links. |
| Upstream Router or Aggregation Connection | 1GbE or 10GbE uplink | Connect to an upstream router, aggregation switch, or higher-level network layer after verifying the interface, optic, fiber, and cable requirements on both devices. |
| Check Item | Confirmed Condition | Deployment Check |
| PoE Access Ports | 24 × 10/100/1000BASE-T PoE+ ports, up to 30W per port, 370W total budget | Confirm the connected device power requirements and total PoE demand. |
| Uplink Ports | Four 1/10GbE SFP/SFP+ uplinks | Verify the optic, fiber type, cable, and operating speed at both ends. |
| Uplink PoE Limitation | Uplink ports do not provide PoE | Connect powered devices only to the PoE-enabled RJ-45 access ports. |
| Virtual Chassis | Up to four EX2300 switches; SFP+ is required for VCP connections | Confirm the Virtual Chassis license and configure the uplink ports as VCPs. |
| SFP+ DAC | Passive 1 m, 3 m, 5 m, and 7 m DAC cables are supported | Use supported DAC cables for short-distance switch-to-switch connections. |
| Power and Airflow | One fixed internal AC PSU, two fixed fans, front-to-back airflow | Provide suitable AC power and maintain the required airflow direction. |
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.