A9K-MOD400-SE, Cisco ASR 9000 Router, 400G modular linecard/service edge optimized
$253,026
Cisco’s A9K-MOD400-SE 400G modular line card is optimized for service edge applications, delivering high performance and scalability. Ideal for large enterprises and service providers, this line card ensures robust network capabilities, addressing advanced data traffic demands efficiently.
A9K-MOD400-SE Specifications |
|
| Chassis compatibility | Compatible with the Cisco ASR 9922, 9912, 9910, 9906, 9904, 9010, and 9006 routers |
| Port density | In the 400G modular line card, up to 2 modular port adapters are supported per line card for up to:
● 40-port 10G or 64-port 1G interfaces
● 4-port 40G interfaces
● 4-port 100G interfaces
In the 200G modular line card, two modular port adapters are supported per line card, except for the 2-port 100 Gigabit modular port adapter and the 20-port 10 Gigabit modular port adapter. The 2-port 100 Gigabit and 20-port 10 Gigabit modular adapters are supported only in bay 0 of the 200G modular line card. The achievable port density on this line card is as follows: ● 20-port 10G or 64-port 1G interfaces
● 4-port 40G interfaces
● 2-port 100G interfaces
|
| Ethernet |
● IEEE 802.3 compliant
● 10 Gigabit Ethernet PHY monitoring
● IEEE 802.x flow control
● Full-duplex operation
● Per-port byte and packet counters for policy drops, oversubscription drops, Cyclic Redundancy Check (CRC) error drops, packet sizes, and unicast, multicast, and broadcast packets
|
| Card density | Maximum number of line cards per system:
● Cisco ASR 9922: 20
● Cisco ASR 9912: 10
● Cisco ASR 9910: 8
● Cisco ASR 9906: 4
● Cisco ASR 9904: 2
● Cisco ASR 9010: 8
● Cisco ASR 9006: 4
|
| Options | Each line card is available as either a service edge – optimized line card (enhanced QoS) or a packet transport – optimized line card (basic QoS) |
| Reliability and availability | Line card Online Insertion and Removal (OIR) support without system impact |
| Network Equipment Building Standards (NEBS) | Cisco ASR 9000 Series Routers are designed to meet:
● SR-3580: NEBS Criteria Levels (Level 3)
● GR-1089-CORE: NEBS EMC and Safety
● GR-63-CORE: NEBS Physical Protection
|
| Operating temperature (nominal) | 41 to 104°F (5 to 40°C) |
| Operating temperature (short-term) |
23 to 131°F (-5 to 55°C) |
| Operating humidity (nominal) relative humidity | 10 to 85% |
| Storage temperature | -40 to 158°F (-40 to 70°C) |
| Storage relative humidity | 5 to 95%
Note: Not to exceed 0.024 kg of water per kg of dry air |
| Operating altitude | -60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements) |
| ETSI standards | Cisco ASR 9000 Series Routers are designed to meet:
● EN300 386: Telecommunications Network Equipment (EMC)
● ETSI 300 019 Storage Class 1.1
● ETSI 300 019 Transportation Class 2.3
● ETSI 300 019 Stationary Use Class 3.1
● EN55022: Information Technology Equipment (Emissions)
● EN55024: Information Technology Equipment (Immunity)
● EN50082-1/EN-61000-6-1: Generic Immunity Standard
|
| EMC standards | Cisco ASR 9000 Series Routers are designed to meet:
● FCC Class A
● ICES 003 Class A
● AS/NZS 3548 Class A
● CISPR 22 (EN55022) Class A
● VCCI Class A
● BSMI Class A
● IEC/EN 61000-3-2: Power Line Harmonics
● IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
|
| Immunity | Cisco ASR 9000 Series Routers are designed to meet:
● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
● IEC/EN-61000-4-3: Radiated Immunity (10V/m)
● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
● IEC/EN-61000-4-5: Signal Ports (1kV)
● IEC/EN-61000-4-5: Surge DC Port (1kV)
● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
|
| Safety | Cisco ASR 9000 Series Routers are designed to meet:
● UL/CSA/IEC/EN 60950-1
● IEC/EN 60825 Laser Safety
● ACA TS001
● AS/NZS 60950
● FDA: Code of Federal Regulations Laser Safety
|
Get any Information:
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.
