ASR-9910, Cisco ASR 9000 Router, 10-slot chassis/400Gbps/No PSU
$50,281
The Cisco ASR-9910, part of the Cisco ASR 9000 series, is a cutting-edge network router solution designed to meet the high-speed data demands of contemporary infrastructure. It delivers robust performance, reliability, and superior network security, making it an ideal choice for modern enterprises looking to upgrade their network capabilities.
ASR-9910 Specification |
|
| Physical specifications | Height: 36.69 in.(931.9mm) (21RU)
Width: 17.60 in. (447.04 mm) Depth: ● With Air Reflector: 39.63 in. (1006.6mm)
● Without Air Reflector: 30.41 in. (772.4mm)
Weight: ● 170 lb (77.27 kg) (Chassis with 2 PEMs)
● 302.25 lb (137.38 kg) (2 Fan Trays, 2 RSP, 5 Fabric Cards, 2 PEMs)
|
| Slot orientation | Vertical |
| Cisco ASR 9000 Series RSP | Dual redundant RSPs with integrated fabric in 2 slots |
| Fabric | 6 + 1 redundant fabrics
(2 located on the RSP, 5 on dedicated switch fabric cards) |
| Cisco ASR 9000 Series line cards | 8 line-card slots |
| “Commons” components | 2 RSPs
5 fabric cards 2 fan trays 2 PEMs (either DC or AC) 1 fan filter |
| Reliability and availability | Fabric redundancy
Fan redundancy Feed redundancy Power-supply redundancy Route processor redundancy Software redundancy |
| Rack mounting | 19-in.
21- and 23-in. adapters available Slide rails available for 4 post racks |
| Cabinet mounting | Yes |
| Wall mounting | No |
| Airflow | Front-to-back |
| Performance | |
| Fabric | One per RSP and five dedicated switch fabric card slots:
● Support for 6 + 1 redundancy
● Operate in active/active nonblocking mode
● Built-in service-intelligence and traffic-prioritization capability
|
| Thermal | Two fan trays:
● 12 high-efficiency fans per tray
● Variable-speed fans for optimal thermal performance
● No single point of failure
|
| Power | |
| Modularity | Pay-as-you-grow power for future scalability, available in AC and DC.
Multiple power module types: ● 6 kW AC power modules
● 4.4 kW DC power modules
Note: Mixing of AC and DC modules is not supported |
| Redundancy |
● AC: N+N redundancy
● DC: N+1 redundancy
● Power module redundancy
● A/B Feed redundancy
● PEM redundancy
|
| Power zones | No power zone restrictions
Fully load-sharing power infrastructure |
| Power input | Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum)
Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum) |
| Power module airflow | Front-to-back |
| Environmental Specifications (All Entries Applicable to Cisco ASR 9906 and ASR 9910) | |
| Operating temperature (nominal) | 41 to 104°F (5 to 40°C) |
| Operating temperature (short‑term) | 23 to 131°F (-5 to 55°C) for ASR 9906
23 to 122°F (-5 to 50°C) for ASR 9910 |
| Operating humidity (nominal) (relative humidity) | 5 to 90% |
| Storage temperature | -40 to 158°F (-40 to 70°C) |
| Storage (relative humidity) | 5 to 93% |
| Operating altitude | -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) |
| Regulatory Compliance (All Entries Applicable to Cisco ASR 9906 and ASR 9910) | |
| Network Equipment Building Standards (NEBS) | Cisco ASR 9906 and ASR 9910 Routers are designed to meet:
● SR-3580: NEBS Criteria Levels (Level 3)
● GR-1089-CORE: NEBS EMC and Safety
● GR-63-CORE: NEBS Physical Protection
● VZ.TPR.9205: Verizon TEEER
|
| ETSI standards | Cisco ASR 9906 and ASR 9910 Routers are designed to meet (qualification in progress):
● EN300 386: Telecommunications Network Equipment (EMC)
● ETSI 300 019 Storage Class 1.1
● ETSI 300 019 Transportation Class 2.3
● ETSI 300 019 Stationary Use Class 3.1
|
| EMC standards emission | Cisco ASR 9906 and ASR 9910 Routers are designed to meet:
● FCC Class 47CFR15 A
● ICES 003 Class A
● AS/NZS CISRP22 Class A
● CISPR 22 (EN55022) Class A
● VCCI Class A
● BSMI Class A
● IEC/EN 61000-3-12: Power Line Harmonics
● IEC/EN 61000-3-11: Voltage Fluctuations and Flicker
● EN55022: Information Technology Equipment (Emissions)
● EN 50121-4: Railway EMC
|
| EMC standards immunity | Cisco ASR 9906 and ASR 9910 Routers are designed to meet:
● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
● IEC/EN-61000-4-3: Radiated Immunity (10V/m)
● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
● IEC/EN-61000-4-5: Signal Surge Ports (1kV)
● IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)
● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
● EN55024: Information Technology Equipment (Immunity)
● EN50082-1/EN-61000-6-1: Generic Immunity Standard
● EN 50121-4: Railway EMC
|
| Safety | Cisco ASR 9906 and ASR 9910 Routers are designed to meet:
● UL/CSA/IEC/EN 60950-1
● IEC/EN 60825 Laser Safety
● ACA TS001
● AS/NZS 60950
● FDA Code of Federal Regulations Laser Safety
|
Get any Information:
Do you have any question or need quotation about this Product? Contact us now via Fast Response Chat or Contact me here.
